How to Find a Manufacturer for Hoodies That Gets the Fit Right

Most of the time it‘s not too hard to manufacturer for hoodies. The difficult part is describing the product that only exists in your mind.

Perhaps you‘d like a heavyweight hoodie with a relaxed fit, a slightly dropped shoulder, large hood and a soft touch even after washing. That sounds fairly straightforward to you. To a manufacturer, there are still many issues to sort out.

This is only the beginning, this is where the development kicks in.

Start With the Hoodie You Have in Mind

WORDS such as ‘heavyweight,’ ‘oversized,’ and ‘premium’ are helpful, yet they are not enough to describe a piece of clothing.

A couple of heavyweight hoodies can have entirely differentHandFeeland6:the stiffness in how they hang and sit on the body may be very different.

In this case if you have a hoodie (or similar clothing of fit or fabric that you like) then just use this as a guide.

Before you get in touch with the manufacturer, you could let them know a lot more useful information, without just mentioning that you want an oversized hoodie:

Maintain the body shape but weigh down the fabric.

Or:

Maintain tight fit but widen the sleeves a little.

It really simplifies the development because of this kind of references.

The Fabric Changes the Whole Hoodie

The GSM is good but it doesn‘t really show the full picture.

A 400 GSM hoodie doesn‘t feel the same as another 400 GSM hoodie of a different blend or warp. The blend and warp can influence the hand. Looking at a couple of examples of blends.

Here you need to consider what you want when you actually wear it.

Wants our hoodie to stay in shape?

Care to it to feel gentle and voisy?

Prompt the Reflush the this?

If the fabric is a vintage washed look?

These decisions must be considered collectively and not just just because the gauge number on the specification sheet appears very good.

Try the Sample Like You Would Wear It

When we receive the first sample, try not to put it on for thirty seconds and see how you look.

Seriously, move in it actually.

Pull the hood over your head. Lift up your arms. Sit down. Note where the end of the sleeve is. Study the shoulder line and take in how the body falls.

This is even more relevant to larger hoodies.

A hoodie can look fine while laying flat, yet feel too long, or too wide when being worn.

The hood. If the hood is too small you will not be able to wear it properly. If the hood is too heavy it will pull down the garment. If the fabric is too soft it will lose its shape.

These are things that would be difficult to judge from a product photograph.

Don’t Be Afraid of the First Revision

The initial sample need not be perfect.

Perhaps the body is to short, perhaps the body is right, perhaps the sleeves are too long, maybe it needs more volume in the hood, perhaps the ribbing is too loose.

Provide manufacturer specific feedback.

What is helpful? “The sleeves are too long”

The fit just doesn‘t seem right.

The manufacturer can see the level of knowledge and understanding you have of his product in the next sample.

If the changes are made correctly and the garment does get significantly closer to your goal, then this is a good thing. You are not just testing the hoodie now. You‘re also testing the process.

Small Details Can Change the Whole Look

Hoodies are not complicated pieces of clothing but the little details can make all the difference.

Take the rib.

If the cuffs are not tight enough then the sleeves will not hold shape. If the cuffs are too tight then the hoodie will feel uncomfortable.

The shoulder is another case in point. Drop the shoulder and the silhouette of a garment can be radically altered from that of a standard shoulder seam.

This includes the hood, drawcord, pocket construction, stitchings, label and finishing.

You don‘t need to specify every detail in detail on a complex notation in the first stage. However once you have a sample you are happy with then those details should be documented so that version can be produced again.

What Works on One Hoodie Has to Work in Bulk

A sample is one piece of clothing.

Production is hundreds or thousands.

This is when things such as consistency really come into play.

Fabric must be uniform. The measurements must conform with the agreed measurements. Materials such as colors, printing, embroidery, stitch, and finishing should be similar to the decided version.

As a result this will be more significant if the hoodie has been washed or undergone other finishing processes.

Even a small deviation in the washing can alter the color, hand feel and general appearance.

So this is why the approved sample should serve as a reference during production.

Think About the Next Order Too

When designing a hoodie for a fashion brand, one order might turn into many.

It is important that the style that sells well, if needs be, can be produced again in five or six months time.

You don‘t want to go back to there.

Maintain the finalized measurements, fabric details, artwork, construction specifics, and approval sample collectively. That provides the manufacturer a definite reference for your next production order.

It all becomes quite easy if the original product has been correctly documented.

Working With JiuvelWear

Can be customized if in the case of brands designing their own customized hoodies? JiuvelWear (Dongguan Jiuzuo Clothing Co., Ltd.) can handle customized hoodies based on sample garments, measurement, fabric needed and design.

Begin with the product you want to create and then translate the particulars into a sample to be viewed and fine-tuned prior to manufacturing an entire batch.

This is important because it is much easier to fix most issues while still viewing the sample than it is to do so after the whole batch has been made.

A manufacturer for your hoodies will not be an issue. To find one that will execute the “make it heavier, but keep the same fit” instruction is the goal.