Wool Coat Manufacturers and What Makes a Coat Work

It is important to select the right wool coat manufacturers when you produce a good quality wool coat; it is not just about selecting a nice fabric. The weight, construction, cut, lining and finishing of the coat all alter the appearance and feel of the finished coat.

Sometimes a coat looks great hanging on a hanger but then feels all wrong when you start to wear it. The shoulders can feel too stiff and the sleeves can sit too funny and the fabric might not have as much drape as you thought it would.

This is where the manufacturing process becomes more relevant.

The Fabric Sets the Tone

Wool is not just wool.

Different wool blends and weights, textures and finishes will produce very different effects. A heavier weight fabric will give the coat a more ‘solid’ and defined appearance, whereas a lighter weight fabric will give a more softer shape to the garment.

The material influences the way the coat will drape from the shoulders, as well as the comfort of the coat when worn over other clothing.

Which is precisely why the selection of fabric should be done with the design taken into account.

Just because a fabric appears nice on a sample and“feels right” when you hold it in your hands does not mean that it will perform so well when it becomes a full coat.

A Coat Needs Structure

Much more is happening beneath the shell of a wool coat.

The shoulders, collar, lapel, front construction and internal support all have an effect on the ultimate form.

Assuming we take the collar as an example.

It should sit comfortably against the neck in the open position and when buttoned. The lapel should also hold shape rather than being flat and uneven.

These features may not be so apparent when viewing a technical drawing, however they are very evident when the garment is finished.

Fit Becomes More Noticeable in a Coat

Typically you don‘t buy a coat that fits you as well as a T-shirt however that doesn‘t make fit any less important.

Indeed, difficulties faced by small proportion can become more visible.

If the shoulder width is too small it will also be uncomfortable if the wearer is wearing a sweater underneath.

A body that is too broad can break the line and cause the coat to appear as if it is heavier.

A sleeve that is just a fraction too long is also enough to alter the overall balance of the garment.

A coat should be shown in the clothing they would be worn in, which are actually worn in.

The Lining Changes More Than You Think

We spend most of our time focusing on the outside of the coat, however the lining also influences the way the clothing will react when worn.

An easy to put-on and take-off coat may be one with a good lining (over knit wear or other layers).

The apparatus also the entire character of the garment.

It shouldn‘t just be down to appearance of lining, it should be considered if it matches the weight and construction of coat.

That relationship becomes even more critical for a winter coat.

Small Details Make a Coat Look Finished

As it is generally a clean looking item, it is easy to differentiate the fine details.

The buttons, pouch construction,stitching, cuffs, labels and edge finishing are just some of the ways that the final garment can be effected.

You shouldn‘t have to put premium details on everything.

It is not important what the details are, only that they work.

Sometimes, the easiest coat with a crisp, clean construction looks so much more elegant than a complicated design, where the smaller details are just not quite right.

A Sample Needs to Be Worn

One should not approve a coat just because it looks good on your mannequin.

I just copied the paragraph I want to put it on.

Layer under and over it. Wear it over a sweater or the kind of layers your customer will be wearing.

Button it.

Walk around.

Sit down.

Conduct the following actions:7. Move your arms.

Observe the shoulders, sleeves and neck line the entire weight.

These simple tests will also highlight problems that are not easy to detect just from looking at a coat hung on a rack.

If it doesn‘t feel good, we can change it much more easily during sampling than in production.

Production Is About Consistency

After the sample is agreed upon, then enters the «Problem».

It is now important for the manufacturer to produce the exact product throughout the production run.

Fabric is to match the approved sample. Measurements to stay true to the agreed-upon specifications. Construction, buttons, lining, stitch lines, finishing etc. to be as per approved details.

For wool, the uniformity of the fabric may be particularly evident though as with the polyester a variation in weight, hand or shade can alter the final product.

Being able to provide one complete, excellent example is always helpful.

What truly counts is a run that gives you that sample time-after-time.

Finding the Right Manufacturing Partner

An indicator of the best manufacturer isn‘t the one claiming it can make a coat in wool.

You want to know if it understands the sort of coat you are designing and if it can plough through the details on sampling.

A successful discussion will include fabric, measurements, construction, lining, finishing and any sample garments or references you happen to have.

This provides both parties with a better picture of what is expected to be produced prior to production.

Developing Wool Coats With JiuvelWear

JiuvelWear, owned by Dongguan Jiuzuo Clothing Co., Ltd., for brands designing and manufacturing a unique wool coat can provide fabric specifications, pattern, features, sample, and manufacturing.

The process need not be a complex task:

Begin with the coat you‘d like to produce, select appropriate fabrics, then develop the fit with sampling, then ensure the finished details are completed according to the approved sample.

The perfect wool coat doesn‘t have to be full of bells and whistles. It just needs the right fabric, the right construction and enough of the right details to be noticed when you actually try it on.